Your Title Goes Here

Merchandise Description

Observe:

22mm Higher Toruqe 12V DC Planetary Gear Micro Motor for Intelligent Door Lock

Major rewards:

one. Motor specs this kind of as voltage, velocity, torque,  the shaft, packing can be customized.
two. As a equipment reduction motor, it is very suitable for application that requires reduced rpm and large torque

3. Substantial sealing: the output portion is geared up with an oil seal and O-ring, which can prevent the lubrication grease backflow in the gearbox, and stay away from the aging or damage of oil seal insulation.

4. High performance: making use of a new pressed silicon steel sheet, substantial precision main, robust magnetic permeability. The profile uses the new heat dissipation structure.

five. Applicability: Compact size, appropriate for various functioning environments.
 

Planetary gearbox advantages:

one) Low velocity: twelve – 1650 rpm.

two) Higher torque: .05 kg.cm to 5 kg.cm.

three) Small vibration, reduced noise, minimal power consumption.

Software:

DC miniature Planetary Equipment Motor extensively used in office automation, intelligence furniture, generation automation, health care gear, fiscal equipment and sport device sectors, this sort of as automatic window opener, glass curtain wall, car curtain, financial institution ATM, automatic cash sign-up, note vending equipment, stage limelight, and other automated units.

Parameter:

 

  Reduction ratio 1/5 1/eighteen 1/twenty 1/twenty five 1/sixty six one/seventy seven 1/ninety one/110 one/136 one/246 one/336 1/393 1/484 1/597 one/735 one/1079 1/1475 one/2124 one/3968
12V Rated torque(g.cm) a hundred and seventy 560 650 820 1800 2100 2450 3000 3700 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated velocity(rpm) 1500 400 340 280 a hundred and five 94 eighty 65 53 29 22 19 fifteen.five twelve.5 ten seven.1 five.three three.8 2.
24V Rated torque(g.cm) a hundred ninety 640 750 930 2000 2400 2800 3500 4000 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated pace(rpm) 1600 420 350 290 a hundred and ten ninety eight 84 68 55 31 23 twenty 16 thirteen 10.5 seven.four five.5 three.nine 2.
  Rotation route CW
  Size(L-mm) 23.3 29.five 35.7 41.nine 48.1

 

Rated volt(V) Rated torque(g.cm) Rated pace(rpm) Rated recent(mA) No-load velocity(rpm) No load existing(mA) Fat(g)
12 forty six 7230 <=500 9000 <=120 forty three
24 53 7550 <=300 9000 <=80 forty three

About Us:

I.CH was established in 2006, positioned in HangZhou. We specialised in investigating, establishing, and servicing electric powered motors, gearbox, and substantial precision gears with the modest module. Following years of improvement, we have an unbiased merchandise design and style and R&D crew, support team, and a expert good quality handle team. To understand our provider concept better, give substantial-quality goods and excellent provider, we have been dedicated to the main capacity and training. We have a keeping factory in HangZhou, which generates higher precision tiny mold gears, gear shaft, gearbox, and planetary gearbox assembling.

Our Product:
DC Equipment DC Planetary Equipment Spur Gearbox
Spur Gear Gear

Our Certification:
As we all know, the good results of the firm is dependent on the good quality of the motor. So, to get the acknowledgment in the market, we get ROHS, CE, ISO900 certificates.

Perform-movement:

Support:

ODM & OEM
Gearbox style and growth

Deal&Ship:

Carton, pallet, or what you want
The delivery time is about 30-forty five times.

Customer’s Browsing:

FAQ:

one. Can you custom gearbox?
Indeed.

2. DO you provide the sample?
Yes.

three. Do you give technological support?
Sure

4. Do you have a manufacturing unit?
Of course, we are a expert company.

5. Can I appear to your organization to check out?
Sure

US $3
/ Piece
|
1 Piece

(Min. Order)

###

Operating Speed: Low Speed
Casing Protection: Protection Type
Rated Voltage: 12V, 24V
Gearbox Diameter: 22mm
Gearbox Type: Planetary Gearbox
Ratio: 1:5-1:3968

###

Customization:

###

  Reduction ratio 1/5 1/18 1/20 1/25 1/66 1/77 1/90 1/110 1/136 1/246 1/336 1/393 1/484 1/597 1/735 1/1079 1/1475 1/2124 1/3968
12V Rated torque(g.cm) 170 560 650 820 1800 2100 2450 3000 3700 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated speed(rpm) 1500 400 340 280 105 94 80 65 53 29 22 19 15.5 12.5 10 7.1 5.3 3.8 2.0
24V Rated torque(g.cm) 190 640 750 930 2000 2400 2800 3500 4000 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated speed(rpm) 1600 420 350 290 110 98 84 68 55 31 23 20 16 13 10.5 7.4 5.5 3.9 2.0
  Rotation direction CW
  Length(L-mm) 23.3 29.5 35.7 41.9 48.1

###

Rated volt(V) Rated torque(g.cm) Rated speed(rpm) Rated current(mA) No-load speed(rpm) No load current(mA) Weight(g)
12 46 7230 <=500 9000 <=120 43
24 53 7550 <=300 9000 <=80 43
US $3
/ Piece
|
1 Piece

(Min. Order)

###

Operating Speed: Low Speed
Casing Protection: Protection Type
Rated Voltage: 12V, 24V
Gearbox Diameter: 22mm
Gearbox Type: Planetary Gearbox
Ratio: 1:5-1:3968

###

Customization:

###

  Reduction ratio 1/5 1/18 1/20 1/25 1/66 1/77 1/90 1/110 1/136 1/246 1/336 1/393 1/484 1/597 1/735 1/1079 1/1475 1/2124 1/3968
12V Rated torque(g.cm) 170 560 650 820 1800 2100 2450 3000 3700 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated speed(rpm) 1500 400 340 280 105 94 80 65 53 29 22 19 15.5 12.5 10 7.1 5.3 3.8 2.0
24V Rated torque(g.cm) 190 640 750 930 2000 2400 2800 3500 4000 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000
Rated speed(rpm) 1600 420 350 290 110 98 84 68 55 31 23 20 16 13 10.5 7.4 5.5 3.9 2.0
  Rotation direction CW
  Length(L-mm) 23.3 29.5 35.7 41.9 48.1

###

Rated volt(V) Rated torque(g.cm) Rated speed(rpm) Rated current(mA) No-load speed(rpm) No load current(mA) Weight(g)
12 46 7230 <=500 9000 <=120 43
24 53 7550 <=300 9000 <=80 43

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China 22mm High Toruqe 12V DC Planetary Gear Micro Motor for Smart Door Lock     manufacturer China 22mm High Toruqe 12V DC Planetary Gear Micro Motor for Smart Door Lock     manufacturer
editor by czh 2023-01-19

Recent Posts