Your Title Goes Here

Product Description

Solution Characteristics

* Compact composition, integration of alloy aluminum physique to make certain the maximum rigidity and corrosion resistance, and straightforward to assemble with multiple precision machined area.
* The use of prime-amount spiral bevel equipment, with optimization design, the get in touch with tooth floor of uniform load, allowable hith torque output.
* Gear is made of higher toughness alloy steel carburizing, grinding precision.
* The design of multiple alloy metal output and enter shaft applies to a variety of industrial needs.
* The simplified framework design with large torque and minimal backlash applies to applications of precision servo.
* Easy mount, with maintenance-totally free, no need to change the grease and long provider life.
* Software in Precision Rotary Axis Drives, Vacation Gantry and Columns, Material Dealing with Axis Drives, Industrial Places in Automation, Aerospace, and Device Tool and Robotics.

Solution Description

Shaft Enter Configuration – Substantial Precision Spiral Bevel Gearboxes
* JAC-C Collection: Shaft Input Configuration, and Hollow Output Shaft with Two Shrinks Discs.
* Types: JAC065C, JAC075C, JAC090C, JAC0110C, JAC0140C, JAC0170C, JAC210C.
* JAC-H Collection: Shaft Enter Configuration, and Hollow Output Shaft with Key Way.
* Designs: JAC065H, JAC075H, JAC090H, JAC0110H, JAC0140H, JAC0170H, JAC210H.
* JAC-L Collection: Shaft Input Configuration, and Solid Output Shaft.
* Types: JAC065L, JAC075L, JAC090L, JAC0110L, JAC0140L, JAC0170L, JAC210L.
* Gear Ratios: Spiral bevel gear established of higher precision grinding can accomplish from 1:1 to 6:1 as standard.
* Stage: 1 phase (1:1 to 6:1).
* Rated Output Torque (N.m): From 12N.m to 1300N.m.
* Fault End Torque = 2 Instances of Rated Output Torque.
* Max. Input Velocity (rpm): From 2500RPM to 3500RPM.
* Rated Enter Velocity (rpm): From 1500RPM to 2500RPM.
* Low Backlash (arcmin): From 6 arcmin to 8 arcmin. 
* Max. Radial Power (N) Of Output Shaft: From 900N to 11500N. 
* Max. Axial Pressure (N) Of Output Shaft: From 450N to 5750N. 
* Max. Radial Drive (N) Of Enter Shaft: From 700N to 7800N. 
* Max. Axial Pressure (N) Of Enter Shaft: From 350N to 3900N. 
* Low Sounds Level (dB): From 71dB to 82dB. 
* Higher Performance (%): 98%.
* Average Existence Span (hr): 20000 several hours.
* Lubrication: Synthetic lubrication grease
* Mass Moments of Inertia (kg/cm2): From .forty three kg/cm2 to 195.4 kg/cm2.

Motor Flange Input Configuration – Higher Precision Spiral Bevel Gearboxes
* JAC-FC Collection: Motor Flange Enter Configuration, and Hollow Output Shaft with Two Shrinks Discs.
* Models: JAC065FC, JAC075FC, JAC090FC, JAC0110FC, JAC0140FC, JAC0170FC, JAC210FC.
* JAC-FH Series: Motor Flange Input Configuration, and Hollow Output Shaft with Important Way.
* Designs: JAC065FH, JAC075FH, JAC090FH, JAC0110FH, JAC0140FH, JAC0170FH, JAC210FH.
* JAC-FL Sequence: Motor Flange Input Configuration, and Reliable Output Shaft.
* Types: JAC065FL, JAC075FL, JAC090FL, JAC0110FL, JAC0140FL, JAC0170FL, JAC210FL.
* Equipment Ratios: Spiral bevel equipment set of high precision grinding can obtain from 1:1 to a hundred:1 as normal, customized-created max. four hundred:1 ratio.
* Phase: 1 phase (1:1 to 6:1), 2 phase (8:1 to thirty:1), 3 phase (32:1 to 100:1).
* Rated Output Torque (N.m): From 12N.m to 1300N.m.
* Fault End Torque = 2 Occasions of Rated Output Torque.
* Max. Enter Pace (rpm): From 2000RPM to 5000RPM.
* Rated Enter Velocity (rpm): From 1500RPM to 2500RPM.
* Low Backlash (arcmin): From 6 arcmin to 15 arcmin. 
* Max. Radial Drive (N) Of Output Shaft: From 900N to 11500N. 
* Max. Axial Force (N) Of Output Shaft: From 450N to 5750N. 
* Low Sounds Degree (dB): From 71dB to 82dB. 
* Higher Effectiveness (%): From ninety four% to 98%.
* Average Lifestyle Span (hr): 20000 hrs.
* Mass Moments of Inertia (kg/cm2): From .15 kg/cm2 to 195.4 kg/cm2.

Product Parameters

Shaft Input Configuration – Substantial Precision Spiral Bevel Gearboxes

Motor Flange Input Configuration – Higher Precision Spiral Bevel Gearboxes

Product Dimensions

Shaft Enter Configuration – Substantial Precision Spiral Bevel Gearboxes
* JAC-C Sequence: Shaft Enter Configuration, and Hollow Output Shaft with Two Shrinks Discs.
* Versions: JAC065C, JAC075C, JAC090C, JAC0110C, JAC0140C, JAC0170C, JAC210C.

Shaft Input Configuration – High Precision Spiral Bevel Gearboxes

* JAC-H Collection: Shaft Input Configuration, and Hollow Output Shaft with Important Way.
* Designs: JAC065H, JAC075H, JAC090H, JAC0110H, JAC0140H, JAC0170H, JAC210H.

Shaft Input Configuration – Large Precision Spiral Bevel Gearboxes
* JAC-L Collection: Shaft Input Configuration, and Solid Output Shaft.
* Designs: JAC065L, JAC075L, JAC090L, JAC0110L, JAC0140L, JAC0170L, JAC210L.

Motor Flange Input Configuration – Large Precision Spiral Bevel Gearboxes
* JAC-FC Collection: Motor Flange Input Configuration, and Hollow Output Shaft with Two Shrinks Discs.
* Models: JAC065FC, JAC075FC, JAC090FC, JAC0110FC, JAC0140FC, JAC0170FC, JAC210FC.

Motor Flange Enter Configuration – High Precision Spiral Bevel Gearboxes
* JAC-FH Series:
 Motor Flange Enter Configuration, and Hollow Output Shaft with Important Way.
* Versions: JAC065FH, JAC075FH, JAC090FH, JAC0110FH, JAC0140FH, JAC0170FH, JAC210FH.

Motor Flange Input Configuration – High Precision Spiral Bevel Gearboxes
* JAC-FL Sequence: Motor Flange Enter Configuration, and Strong Output Shaft.
* Types: JAC065FL, JAC075FL, JAC090FL, JAC0110FL, JAC0140FL, JAC0170FL, JAC210FL.

US $99-999
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Right-Angle, 90 Degree
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: 1-Stage, 2-Stage, 3-Stage

###

Customization:
US $99-999
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Right-Angle, 90 Degree
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: 1-Stage, 2-Stage, 3-Stage

###

Customization:

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China Precision Helical Planetary Gearboxes, High Precision Torque Planetary Gearbox, Precision Stepper Motor with Planetary Gearbox, Low-Backlash Planetary Gearheads     motor armatureChina Precision Helical Planetary Gearboxes, High Precision Torque Planetary Gearbox, Precision Stepper Motor with Planetary Gearbox, Low-Backlash Planetary Gearheads     motor armature
editor by czh 2023-01-15

Recent Posts