Your Title Goes Here

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk710-16 1730 710kw 10kv IP20

I. Overview
The huge a few-stage synchronous motor for TK series air compressor is a higher-functionality collection solution specially designed and produced by our business for the load of air compressor.
This collection of motors adopts new technological innovation, new supplies, new processes, exquisite material choice, and sophisticated production. It has the characteristics of little size, light fat, stunning look, higher effectiveness, low noise, low vibration, safe and reputable operation, and practical use and servicing.
2. Implementation requirements
GB755 Rotating Motor Ranking and Efficiency
Classification of GB/T997 rotary motor composition sort, set up kind and junction box place (IM code)
GB/T1571 A few-period synchronous motor examination method
GB/T1993 Rotating Device Cooling Approach
GB/T4942.1 Security class (IP) classification of the total framework of rotating electrical machines
GB/T10068 The measurement, evaluation and limit of mechanical vibration with a shaft center top of 56mm and previously mentioned
GB/T10069 Rotating Machine Sounds Measurement Method and Limit
JB/ CZPT Circumstances of Big Three-section Synchronous Motor Part 1: TK Sequence
three. Basic specialized parameters
Power range: 250~10000KW
Rated voltage: 6000, 10000V
Rated pace: 250, 273, three hundred, 333, 375, 428, 500, 600r/min
Rated frequency: 50HZ
Security level: IP00, IP20, IP23, IP44
Insulation class: F
Quota: SI
Cooling method: IC01, IC37, IC81W
Set up approach: IM7311, IM5710, IM7312, IM7315
*Can be manufactured in accordance to other parameters according to user wants
4, technological attributes The structural design is sensible, risk-free and reputable, and the capacity to stage out of phase is sturdy.
four.two The primary insulation construction making use of new insulating supplies has high voltage resistance and long motor life.
four.3 The temperature increase margin is large. The motor adopts F-class insulation, and the temperature increase is assessed according to the temperature rise restrict of the B pole insulation.
four.4 The defense system is advanced and total. The stator windings and bearings are outfitted with temperature detection units, which can detect, alarm and excursion.
four.four.2 Shutdown space heater with anti-condensation influence.
4.five Massive inertia. Motors with diverse times of inertia can be produced according to person demands.
Five, framework sort The general framework of this collection of motors is welded with steel plates for the body, finish protect, and base plate. The motor is an independent cavity, and the slip ring can be designed with different safety stages in accordance to person specifications.
5.2 Stator: The stator frame is welded by steel plate. The motor stator outlet is led out by a higher-voltage rubber cable. The outlet position can be led out from the reduced component of the foundation or from the main junction box on the facet of the motor.
The stator main is superimposed by minimal-loss silicon metal sheets, and the main sections are divided by radial air flow ducts.
The stator winding is F quality insulation, and the temperature increase is assessed according to B quality to help lengthen the provider lifestyle. It adopts VPI total dipping paint therapy, which has high electrical overall performance, mechanical toughness, insulation overall performance, moisture resistance and thermal balance.
5.3 The rotor magnetic pole main is made of laminated steel plates, and has diverse structures these kinds of as magnetic pole screws and T tails. The rotor bracket has ventilation holes and is equipped with a enthusiast, which can properly control the temperature rise of the rotor.
5.4 Undertake seat variety spherical sliding bearing. The bearings are insulated to avert shaft currents.
Use new lubricating oil and skinny-walled bearing alloy tiles, and set electromagnetic centerline indicators.
5.five According to user demands, the slip ring can be created as a positive pressure air flow framework to improve the security of the motor. The whole length of the motor with the positive pressure air flow construction of the slip ring is slightly elevated.
6. Conditions of Use
6.1 Voltage fluctuation: ±5% (It can operate under ±10% under the circumstances of 7.3 in GB755)
six.two Frequency fluctuation: ±2%
six.three The altitude does not exceed 1000m
six.four The optimum ambient temperature does not exceed +40ºC, and the least is 0ºC.
Seven, product description

Outer diameter of stator punch (Φ2150mm)

Number of poles (16 poles)

Rated electricity (1250KW)
Three-stage synchronous motor for compressor
eight. Ordering instructions Ahead of putting an buy, please refer to the product catalog of this collection to clarify the essential merchandise design, technical specs and other data. If there is a discrepancy in between the specs and the samples, remember to make contact with our firm.
8.two The motor design, rated power, synchronous speed, rated voltage, rated frequency, protection degree, instant of inertia, rotation course, set up sort, etc. need to be indicated when purchasing.
8.three The sample specialized knowledge sheet only lists the relevant information of motors with rated voltages of 6KV and 10KV. If users want other voltage amounts, our organization can also supply appropriate technical data when ordering.
8.4 The technical information and proportions in the sample are only for reference when the user selects the product. The formal details will be supplied by the business after the deal or technical settlement is signed.
eight.five If there are any other particular demands, you should offer the needs and indication the related complex arrangement when purchasing.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk710-16 1730 710kw 10kv IP20


Recent Posts