Reduced Voltage Brushless Servo Motor For Engraving Machine
57IV90/57IV130/57IV180 Functions
1.Operating voltage: DC enter voltage 15VDC to 50VDC ,recommend voltage is 36V
two.The max continuous output present is 10A, the max peak present is 22A (three moments overload capability)Â
three.Suitable differential or single-finished pulse / direction command, have a few manage method of position, velocity and torqe
4.Employing FOC magnetic placement handle engineering and space vector pulse width modulation (SVPWM) closed-loop control engineering
five.The number of pulses for each cycle (subdivision) can be established by the debug software or the dial change environment(digital equipment ratio)
6.Have three types of 90w,130w and 180w DC brushless servo motor to pick.
seven.Have protection of overvoltage, undervoltage, overcurrent and tolerance,and many others.
8.Single / double pulse manner, the pulse valid edge can be decide on.
9.The max pulse frequency of control instruction is 500KHz (manufacturing unit default is 200KHz)
10.Pulse, path and empower sign input interface amount is four.5 to 28V compatible
eleven.With serial RS232 / RS485 debugging operate, but require to use our specific serial debugging cableÂ
twelve.Overall performance: sleek speed, modest overshoot ,little tracking error, reduced heat of motor and driver
Driver Design And Choice Xihu (West Lake) Dis.
| Motor Type | 57IV90 | 57IV130 | 57IV180 | |
| Rated power(W) | 90W | 130W | 180W | |
| Vector Maximum Current | 16A | 18A | 22A | |
| Body Length(MM) | 106.2 0.five | 126.2 0.five | 146.2 0.5 | |
| Operation Voltage | 15-50Vdc,36Vdc recommend | |||
| Overvoltage Protection Voltage | 68Vdc±2 | |||
| Control Method | 32 bits DSP vector FOC control technology | |||
| Pulse Limit Frequency | 500KHz(factory default 200KHz) | |||
| Security | Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm | |||
| Input Signal | Pulse, direction and enable differential / single-ended interface signal, interface level 4.5-28Vdc compatible, no need external current limiting resistor |
|||
| Output Signal | Alarm / in-position signal OC output, the output capacity is100mA, need external pull-up resistor, the maximum pull up voltage is 24Vdc |
|||
| Electronic Gear Ratio | Default 4000 / rev, through the DIP switch or debug software setting subdivision (two hundred-51200) |
|||
| Position Error Control Accuracy | ±1 Pulse | |||
| Speed Control Accuracy | ±2 rpm | |||
| Maximum  Acceleration | 100 rpm/ms | |||
Dialing Swap Options
| Pulse/Rev. | SW1 | SW2 | SW3 | SW4 |
| Default | ON | ON | ON | ON |
| 800 | OFF | ON | ON | ON |
| 1600 | ON | OFF | ON | ON |
| 3200 | OFF | OFF | ON | ON |
| 6400 | ON | ON | OFF | ON |
| 12800 | OFF | ON | OFF | ON |
| 25600 | ON | OFF | OFF | ON |
| 51200 | OFF | OFF | OFF | ON |
| a thousand | ON | ON | ON | OFF |
| 2000 | OFF | ON | ON | OFF |
| 4000 | ON | OFF | ON | OFF |
| 5000 | OFF | OFF | ON | OFF |
| 8000 | ON | ON | OFF | OFF |
| ten thousand | OFF | ON | OFF | OFF |
| 20000 | ON | OFF | OFF | OFF |
| 40000 | OFF | OFF | OFF | OFF |
Subdivision accuracy (digital equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the generate makes use of the inside default micro-step subdivision, the default internal subdivision of the driver is 400Pulse / rev, and the digital gear ratio can also be set by the debugging software program. SW5 established the motor path,when turnON, the motor turns clockwise (CW),when turn OFF, the motor turns counterclockwise(CCW). SW6 handle manner selection, whenON, the motor enters the self-test manner,creating one particular CZPT and reverse revolution, has been recurring till exit self-examination mode, the exterior handle signal is invalid at self take a look at mode, whenOFF, the motor exits self-take a look at manner,then the exterior control sign is legitimate.
Mechanical Composition Dimension
|  Driver mode | Motor body length(mm) | Driver thickness(mm) | Integrated motor driver length(mm) |
| 57IV90 | seventy six | 30.2 | 106.2 |
| 57IV130Â | 96 | 30.two | 126.2 |
| 57IV180Â | 116 | 30.2 | 149.two |
Note : All over is generally utilized, and we can personalize in accordance to your request or decide on the suitable model for you, you should tell us following parameters: present, voltage, holding torque, entire body length,the software spot.
Software
Appropriate for all kinds of little and medium-sized automation equipments and devices. These kinds of as: laser tools, health care tools, 3D printer, modest and medium-sized engraving machine, electronic processing gear, automatic crawling equipment, particular CNC device instrument, packaging equipment and robot. It is specifically useful for consumers who count on lower noise and higher velocity applications.
Packaging and delivery
1.Outer packing: CZPT export carton with needed shipping and delivery marks
2.Internal packing: Watertight packing with shock absorbing EPE and cardboard surroundedÂ
3.As for every the clientele specifications
Our services
one.Doing work time : eight:00 a.m – ten:00 p.m .Any inquiries, you should explain to us freely, we will be reply you asap.
2.Lead time : For samples, 2 to 5 days will be Alright. For mass production, the direct time count on the portions you require.
three.Warrantity period of time : 18 months and Existence-extended maintenance services for the merchandise.
four.We settle for items customize.
FAQ
Q1: How to select the ideal stepper or servo motor?
A1: There are serveral crucial objects: measurement, duration, keeping torque, voltage, current etc.Soon after validate them and told us, we can select the suited one for you.
Q2: Any other methods to finalize the design?
A2: Positive, you can deliver us the product you are making use of, we can help you locate the suited a single.
Q3:How to promise the Quality of CZPT Areas?
A3: We have the integrated technique for industrial parts high quality handle. We have IQC (incoming quality control), IPQCS (in process high quality management section), FQC (last top quality management) and OQC (out-going quality control) to handle every method of industrial elements prodution.
This autumn:What’s the Advantage of Your Elements for Industry Products?Â
A4:one.The benefit of our items is the competitive charges, quick supply and large high quality. Our
staff are dependable-oriented, welcoming-oriented,and diligent-oriented. Our items are highlighted by strict tolerance, smooth complete and long provider time.
two.Prior to we send out the items,we examine them much more than 3 instances.
Get in touch with
Â
