Description
0.25kW 3ph 2 pole foot mount 63 frame AC motor for 230V or 400V three phase power. The inverter is rated for variable frequency inverter drives with 1ph or 3ph input and 3ph output, or 50Hz fixed frequency mains.
Fixed mains output: 0.25kW (0.33HP) x 2710RPM at 230V or 400V x 50Hz 3ph.
Inverter power output: 14:1 speed control ranging from 271RPM to 3794RPM at 5Hz to 70Hz with appropriate derating at lower speeds.
Full Load Current – 1.24A at 230V or 0.71A at 400V.
When the power supply is connected at 50Hz, the power factor is 0.78.
65% efficiency provides a more efficient motor; see linked products below
Set up junction box link “three a-breast” for 230V ‘Delta’ connections.
Set up a junction box link “two on one side” for a “star” connection of 400V.
130mm wide x 215mm long x 173mm high with an overall IP55 enclosure
Flange mounts on equidistant 4 x 10mm holes on a 115mm PCD with 95mm diameter sockets on a 140mm diameter flange.
The base mounts on a 7mm hole on a 100mm wide x 80mm center, 40mm behind the wheel shoulder.
The shaft diameter is 11mm x 23mm, and the key width is 4mm.
The weight is 6 kg.
The temperature rating is 40C ambient.
Ventilation space is required at the after-cooling air inlet.
Thermistor over temperature protection.
The manufacturer’s part number is 0.2523TECAB35. The previous part number was – 63M2B-TECA B35
For variable speed use:-
Part-time output when inverter powered…
0.63Nm – 0.25kW (0.33HP) x 3794RPM at 70Hz
0.88Nm – 0.25kW (0.33HP) x 2710RPM at 50Hz
0.88Nm – 0.125kW (0.165HP) x 1355RPM at 25Hz
0.88Nm at 5Hz – 0.025kW (0.033HP) x 271RPM
Continuous output when the inverter supplies power…
0.63Nm – 0.25kW (0.33HP) x 3794RPM at 70Hz
0.88Nm – 0.25kW (0.33HP) x 2710RPM at 50Hz
0.75Nm – 0.1kW (0.14HP) x 1355RPM at 25Hz
0.44Nm – 0.0125kW (0.016HP) x 271RPM at 5Hz
